Advanced materials research · 2011 · 24 citations · 7 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsPolymer EngineeringPolymer MaterialsComposite MaterialsFiber-reinforced CompositesNanocompositesPolymer CompositesPolymer-matrix CompositesThermoplastic PolymersFiber-reinforced Polymer CompositesFlexural StrengthFlexural Strength DevelopmentImpact StrengthKenaf FibersPolymer Blend CompatibilizationPolypropyleneTensile Strength
Thermoplastic Elastomer (TPE) composite reinforced with Hibiscus cannabinus, L fiber (kenaf fiber, KF) was prepared via melt blending method using internal mixer at temperature 180°C, screw rotational speed at 40rpm for 10 min. TPE matrix is a blend of polypropylene (PP) and ethylene-propylene-diene monomer (EPDM) at a ratio of 70:30. The optimum fiber loading were investigated from 0% to 20% by volume. The effect of coupling agent maleic anhydride polypropylene (MAPP) on the TPE composite has been investigated. The result shown that, with increasing the kenaf fiber content gradually increased the tensile strength and flexural strength for both treated and untreated PP/EPDM-KF composite. However, at 20% of kenaf fiber loading, it showed decreasing in impact strength due to brittleness of the samples. From the scanning electron micrograph (SEM) it has shown that the composite, with compatibilizer promotes better interaction between TPE and kenaf fiber.
7
Michael A. Zampaloni, Farhang Pourboghrat, S.A. Yankovich et al. · Composites Part A Applied Science and Manufacturing · 2007 · 462 citations
Natural Sciences, Materials Engineering, Materials Science +16
Carbon fibre in automotive applications
Henrik Adam · Materials & Design (1980-2015) · 1997 · 128 citations
Natural Sciences, Automotive Engineering, Materials Science +13
Majid Soleimani, Lope G. Tabil, Satyanarayan Panigrahi et al. · Journal of environmental polymer degradation · 2008 · 111 citations
Natural Sciences, Materials Engineering, Materials Science +16