Effect of expulsion on peak load and energy absorption of low carbon steel resistance spot welds

Abstract

The effects of weld nugget size and expulsion on the performance of low carbon steel resistance spot weld have been investigated in the present paper. Failure mode, peak load and failure energy obtained in tensile–shear test have been used to describe the performance of spot weld. The influence of voids and porosity as well as electrode indentation associated with expulsion on peak load and failure energy is discussed. The results showed that although expulsion does not reduce the load carrying capacity of spot welds, it decreases their energy absorption capability which was attributed to the change of failure location due to excessive electrode indentation associated with expulsion.