Journal of Polymer Science Part B Polymer Physics · 2003 · 36 citations · 40 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsPolymer BlendsPolymer CharacterizationPolymer CompositesPolymer PhysicsPolymer ProcessingPolymer StructureAlkylation ProcessesAlkylation ReactionsBlend CompatibilityBlendingPolymer Blend CompatibilizationPolymer Blend MorphologyPolymer BlendingReactive Extrusion
Abstract Blends of linear low‐density polyethylene (LLDPE) with polystyrene (PS) and blends of LLDPE with high‐impact polystyrene (HIPS) were prepared through a reactive extrusion method. For increased compatibility of the two blending components, a Lewis acid catalyst, aluminum chloride (AlCl 3 ), was adopted to initiate the Friedel–Crafts alkylation reaction between the blending components. Spectra data from Raman spectra of the LLDPE/PS/AlCl 3 blends extracted with tetrahydrofuran verified that LLDPE segments were grafted to the para position of the benzene rings of PS, and this confirmed the graft structure of the Friedel–Crafts reaction between the polyolefin and PS. Because the in situ generated LLDPE‐ g ‐PS and LLDPE‐ g ‐HIPS copolymers acted as compatibilizers in the relative blending systems, the mechanical properties of the LLDPE/PS and LLDPE/HIPS blending systems were greatly improved. For example, after compatibilization, the Izod impact strength of an LLDPE/PS blend (80/20 w/w) was increased from 88.5 to 401.6 J/m, and its elongation at break increased from 370 to 790%. For an LLDPE/HIPS (60/40 w/w) blend, its Charpy impact strength was increased from 284.2 to 495.8 kJ/m 2 . Scanning electron microscopy micrographs showed that the size of the domains decreased from 4–5 to less than 1 μm, depending on the content of added AlCl 3 . The crystallization behavior of the LLDPE/PS blend was investigated with differential scanning calorimetry. Fractionated crystallization phenomena were noticed because of the reduction in the size of the LLDPE droplets. The melt‐flow rate of the blending system depended on the competition of the grafting reaction of LLDPE with PS and the degradation of the blending components. The degradation of PS only happened during the alkylation reaction between LLDPE and PS. Gel permeation chromatography showed that the alkylation reaction increased the molecular weight of the blend polymer. The low molecular weight part disappeared with reactive blending. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 1837–1849, 2003
40
Friedel-Crafts and related reactions
Journal of the Franklin Institute · 1965 · 398 citations
Homogeneous Nucleation and Fractionated Crystallization in Block Copolymers
Alejandro J. Müller, Vittoria Balsamo, María L. Arnal et al. · Macromolecules · 2002 · 220 citations
R. Fayt, R. Jérôme, Ph. Teyssié · Journal of Polymer Science Part B Polymer Physics · 1989 · 208 citations · Full text
Natural Sciences, Materials Engineering, Materials Science +17
R. Fayt, R. Jérôme, Ph. Teyssié · Journal of Polymer Science Polymer Physics Edition · 1982 · 202 citations
Natural Sciences, Materials Engineering, Materials Science +17