The role of carboxylic acids in TALSQuEAK separations

Jenifer C. Braley, J.C. Carter, Sergey I. Sinkov, K.L. Nash, Gregg J. Lumetta

Journal of Coordination Chemistry · 2012 · 34 citations · 27 references

Concepts

Abstract

Abstract Recent reports have indicated that Trivalent Actinide–Lanthanide Separation by Phosphorus reagent Extraction from Aqueous Komplexes (TALSPEAK)-type separations chemistry can be improved through the replacement of bis-2-ethyl(hexyl) phosphoric acid (HDEHP) and diethylenetriamine-N,N,N′,N″,N″-pentaacetic acid (DTPA) with the weaker reagents 2-ethyl(hexyl) phosphonic acid mono-2-ethylhexyl ester (HEH[EHP]) and N-(2-hydroxyethyl)ethylenediamine-N,N′,N′-triacetic acid (HEDTA), respectively. This modified TALSPEAK has been provided with an adjusted acronym of TALSQuEAK (Trivalent Actinide–Lanthanide Separation using Quicker Extractants and Aqueous Komplexes). Among several benefits, TALSQuEAK chemistry provides more rapid phase transfer kinetics, is less reliant on carboxylic acids to mediate lanthanide extraction, and allows a simplified thermodynamic description of the separations process that generally requires only parameters available in the literature to describe metal transfer. This article focuses on the role of carboxylic acids in aqueous ternary (M-HEDTA-carboxylate) complexes, americium/lanthanide separations, and extraction kinetics. Spectrophotometry (UV-Vis) of the Nd3+ hypersensitive band indicates the presence of aqueous ternary Nd–Lac–HEDTA species (Lac = lactate, K 111 = 1.83 ± 0.01 at 1.0 mol L−1 ionic strength, Nd(HEDTA) + Lac− ⇄ Nd(HEDTA)Lac−). While lower levels (0.1 mol L−1 vs. 1.0 mol L−1) of carboxylic acid will still be necessary to control pH and encourage phase transfer of the heavier lanthanides, application of different carboxylic acids does not have an overwhelming impact on Ln/Am separations or extraction kinetics relative to conventional TALSPEAK separations. TALSQuEAK separations come to equilibrium in two to five minutes depending on the system pH using only 0.1 mol L−1 total lactate or citrate. Keywords: TALSPEAKTALSQuEAKHEH[EHP]HEDTASeparations Acknowledgments This work was funded by the US Department of Energy, Office of Nuclear Energy, through the Fuel Cycle Research and Development Program. Pacific Northwest National Laboratory is operated by Battelle Memorial Institute for the US Department of Energy under contract DE-AC05-76RL01830. Notes †Total ionic strength of the aqueous samples varies with both lactate concentration and pH. In the HEH[EHP] experiments total lactate was 0.1 mol L−1 and the ionic strength ranged from about 1.05 to 1.15 mol L−1. The use of NaLac was deemed prudent in experiment design to avoid the complications arising from the lactate esters, lactones, lactides, and polylactates that are known to be present in lactic acid. The salting effect of NaNO3 also improved reproducibility of radiotracer distribution experiments.

References

27