Publication | Closed Access
Factors affecting at-rest lateral stress in artificially cemented sands
45
Citations
14
References
1995
Year
Geotechnical EngineeringAt-rest Lateral StressK OCementationPortland CementEngineeringGeotechnical PropertyMechanical EngineeringCivil EngineeringStress HistoryGeomechanicsCement-based Construction MaterialConstruction Engineering
This paper presents the results of a laboratory study on the at-rest lateral stress and K o of two artificially cemented sands. A modified oedometer ring was used to measure the lateral stress of cemented and uncemented sands. Test materials were No. 3 Ottawa sand and a marine sand with Portland cement. The specimens were prepared using the method of undercompaction to minimize the influence of specimen preparation on test results. The cement contents were 0, 0.5, 1.0, 2.0, 4.0, and 8.0% by the weight of dry sand. The water content of the specimens was 4% of the weight of dry sand and cement. When the sands were cured under zero confining pressure, the test results indicated the following: the at-rest lateral stress in cemented sands decreases significantly with increasing cement content; the relationship between the vertical and at-rest lateral stress is nonlinear and the value of K o increases with increasing vertical stress; and the lateral stress decreases with sand density and curing period. When the specimens were cured under vertical stress, the value of K o during the removal of vertical loading increased with both overconsolidation ratio and cement content. Stress history has a significant influence on the behaviour of at-rest lateral stress in cement sands. Key words : cemented sand, K o , lateral stress, overconsolidation, stress history.
| Year | Citations | |
|---|---|---|
Page 1
Page 1