Journal of The Electrochemical Society · 1990 · 99 citations · 0 references
Natural SciencesChemical EngineeringMaterials ScienceCorrosion ScienceElectrochemistrySurface ScienceCorrosion EngineeringCorrosion InhibitorsCorrosion KineticsCorrosion MechanismsCrevice CorrosionLocalized CorrosionAdsorption IsothermsCompetitive AdsorptionCompetitive Adsorption KineticsCorrosion Inhibition MechanismsCrevice-pitting InteractionElectrochemical Modeling Of Crevice CorrosionLocalized Corrosion InitiationSurface Adsorption Isotherms
Similarities in the inhibition of crevice corrosion and pitting can be explained on the basis of competitive adsorption between inhibitive and aggressive ions. A mathematical model has been developed which takes into account competitive adsorption between aggressive ions (C1) and inhibitive ions (CrO4=), with each ion adsorbing according to a Temkin iso-therm. In the case of crevice corrosion of iron, this model explains the linear relationship which has been observed be-tween the logarithm of the chloride ion activity and the logarithm of the minimum chromate activity required for protec-tion against crevice corrosion. In the case of pitting, this same model describes the linear decrease in pitting potential with the logarithm of the C1- activity at constant CrO4 = concentration. The mathematical model, in conjunction with electro-chemical data and adsorption isotherms, allows calculation of a critical ratio, Ocrit, of surface coverages of aggressive to in-hibitive ion necessary to initiate localized corrosion. This critical ratio was computed to be approximately the same value (1.9) for the crevice corrosion and pitting of iron in chromate/chloride solutions. Nominal confirmation for this computed value of Ocrit was provided by surface analyses using XPS. It is well established (1) that the various forms of local-ized corrosion share certain common features due to the limited exchange of local and bulk electrolytes. In crevice