Journal of Polymer Science Part A Polymer Chemistry · 2011 · 358 citations · 20 references
Natural SciencesChemical EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsGreen Polymer ChemistryPolymer CharacterizationPolymer ProcessingPolymer ProductionThermogravimetric AnalysisDynamic Differential Scanning CalorimetryDynamic Mechanical PropertiesFuransPolyester ProductionPolyester SynthesisThermogravimetric CalorimetryThermogravimetric CurvesThermogravimetric Data Analysis
The study proposes that these furan‑aromatic polyesters can serve as biopolymer materials owing to their satisfactory thermal and mechanical properties and hydrophilicity. The polyesters were synthesized by direct esterification of 2,5‑furandicarboxylic acid with various diols (ethylene glycol, 1,3‑propanediol, 1,4‑butanediol, 1,6‑hexanediol, 1,8‑octanediol) and characterized by FTIR, ¹H NMR, XRD, DSC, TGA, DMA, tensile testing, and contact‑angle measurements. The resulting polymers exhibited densities of 1.19–1.38 kg m⁻³, confirmed structures by FTIR and ¹H NMR, crystalline morphology by XRD, thermoplastic behavior with thermal and mechanical properties comparable to benzene‑aromatic counterparts, hydrophilicity from contact‑angle data, and overall represent a viable renewable alternative to petrochemical polyesters. © 2011 Wiley Periodicals, Inc., J Polym Sci Part A: Polym Chem, 2012.
Abstract A series of furan‐aromatic polyesters were successfully synthesized via direct esterification method starting from 2,5‐furandicarboxylic acid, ethylene glycol, 1,3‐propanediol, 1,4‐butanediol, 1,6‐hexanediol, and 1,8‐octanediol and characterized by Fourier transform infrared spectroscopy (FTIR), nuclear magnetic resonance spectroscopy ( 1 H NMR), X‐ray diffraction (XRD), differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), tensile tests, and so on. The preliminary evidence clearly showed that direct esterification method was rewarding and worthy to synthesize these furan‐aromatic polyesters. The densities of furan‐aromatic polyesters were ranging from 1.19 to 1.38 kg/m 3 . The FTIR and 1 H NMR confirmed their expected structures in detail. The results of XRD showed that these furan‐aromatic polyesters were crystalline polyesters. The results of DSC, TGA, DMA, and tensile tests showed that they behaved as thermoplastic polyester, had satisfactory thermal and mechanical properties, and their thermal stabilities were quite similar to that of corresponding benzene‐aromatic polyesters. The results of contact angle measurement showed that they were hydrophilic. The properties above showed that furan‐aromatic polyesters based on renewable resources could be a viable alternative to their successful petrochemical benzene‐aromatic counterpart. Furthermore, they could be used as biopolymer materials according their satisfactory thermal and mechanical properties and hydrophilicity in the future. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012
20