Journal of Sustainable Cement-Based Materials · 2013 · 135 citations · 9 references
Natural SciencesCivil EngineeringMaterials EngineeringBuilding MaterialsMaterials CharacterizationMechanical Behavior Of MaterialsConcrete MaterialsCreep BehaviorCreep DeformationElastic DeformationStrain AnalysisStress-strain BehaviorCompressive StrengthConcrete Compressive StrengthCreep EffectsCreep StrainDryingElastic StrainShrinkageShrinkage Behavior
Abstract The creep behavior and drying shrinkage performance of fly ash geopolymer (GP) concrete mixtures have been investigated using equivalent grade 40-MPa ordinary Portland cement (OPC) concrete as the reference system. Drying shrinkage values, measured in accordance with AS 1012.13-1992, up to one year fell well below the nominal 700 μstrain limit, with GP concrete values typically less than 400 μstrain at 1 year. Variations in basic mean creep coefficient of concrete (Фcc.b), measured as the ratio of the creep strain to elastic strain for a specimen loaded at 28 days under constant stress of 0.4f c (f c – 28 day compressive strength) was monitored for up to 52 weeks. Values of Фcc.b obtained for steam-cured GP concrete was found to be of the order of 45% lower than corresponding OPC concrete. Based on these results, the effects of GP concrete mixtures on load-dependent (creep) deformations appear to be negligible. The paper further discusses factors that contribute to observed GP concrete creep deformation and drying shrinkage performance. Keywords: geopolymerfly ashdrying shrinkagecreepcompressive strength
9
On the Development of Fly Ash-Based Geopolymer Concrete
Djwantoro Hardjito, Steenie E. Wallah, Dody M.J. Sumajouw et al. · ACI Materials Journal · 2004 · 1.3K citations
Fly Ash-Based Geopolymer Concrete
Djwantoro Hardjito, Steenie E. Wallah, Dody M.J. Sumajouw et al. · Australian Journal of Structural Engineering · 2005 · 861 citations · Full text