Journal of Hydraulic Engineering · 1994 · 36 citations · 20 references
Natural SciencesComputational EngineeringComputational Fluid DynamicsFluid DynamicsHydraulicsTurbulenceTurbulent FlowTurbulent MixingTurbulent TransportEngineering SimulationsRemovalSwirlSwirl EffectsSwirl FlowTurbulence ModelingTurbulence Modelling
Axisymmetric numerical simulation with a finite‐volume method and the k‐ε turbulence model is described for the flow in a circular model settling tank with and without swirl. The geometry of the model tank requires the use of a nonorthogonal boundary fitted grid. Results are compared with experimentally determined streamlines and flow‐through curves as well as with previous computations. For flow without swirl, the numerical simulations are in good agreement with the experimental data, and significant improvement for a critical geometrical configuration was achieved by use of the low‐diffusive HLPA discretization scheme for convection. The inclusion of swirl allows the model to account for the influence of the circumferential removal procedure as well as for the effect of swirl inducing vanes at the inlet. The simplification introduced in modeling the removal equipment impairs somewhat the accuracy of the predicted flow‐through curves. For further improvement, a more realistic and detailed modeling of the swirl momentum and turbulence production by the removal equipment is required, and complete 3‐D modeling may be needed.
20