Water Science & Technology · 2006 · 18 citations · 0 references
EngineeringChemical EngineeringEnvironmental EngineeringResource RecoveryWastewater TreatmentWater TreatmentBiological Treatment ProcessesNutrient RemovalPhosphorus RecoveryPhosphorus RemovalSludge ManagementSludge TreatmentOzonationOzonePhosphorus Recovery From Municipal WastewaterPhosphorus Recovery From WastewaterPhosphorus Removal From Municipal WastewaterSewage Sludge TreatmentSludge ReductionWastewater Treatment Nutrient Removal
This paper shows the potential application of a new sewage treatment process with technologies of excess sludge reduction and phosphorus recovery. The process incorporated ozonation for excess sludge reduction and crystallisation process for phosphorus recovery to a conventional anaerobic/oxic (A/O) phosphorus removal process. A lab-scale continuous operation experiment was conducted with the ratio of sludge flow rate to ozonation tank of 1.1% of sewage inflow under 30 to 40 mgO3/gSS of ozone consumption and with sludge wasting ratio of 0.34% (one-fifth of a conventional A/O process). Throughout the operational experiment, a 60% reduction of excess sludge production was achieved in the new process. A biomass concentration of 2300 mg/L was maintained, and the accumulation of inactive biomass was not observed. The new process was estimated to give a phosphorus recovery degree of more than 70% as an advantage of excess sludge reduction. The slight increase in effluent COD was observed, but the process performance was maintained at a satisfactory level. These facts demonstrate an effectiveness of the new process for excess sludge reduction as well as for phosphorus recovery.