The Journal of the Acoustical Society of America · 1979 · 25 citations · 0 references
Natural SciencesMechanical EngineeringPhysicsAcousticsAerodynamicsFluid DynamicsAcoustic Source ModelingAeroacousticsNoiseNoise MeasurementTurbulenceTurbulent FlowAcoustic Pressure SensorsAerodynamic NoiseAerodynamic Noise CharacterizationCross-correlation AnalysisJet NoiseNoise Source CharacterizationTurbulence NoiseTurbulence-induced Noise
A recently developed diagnostic technique for aerodynamic noise involves cross correlation between various types of source quantities and the radiated sound [T. E. Siddon, 7th ICA (1971)]. The technique is applied to a circular jet where—following H. S. Ribner’s dilatation model—the turbulent pressure is viewed as the basic source fluctuation (the ’’cause’’), and is cross correlated with the radiated acoustic pressure (the ’’effect’’). The cause–effect principle is applied in real time. This led to the adoption of the term ’’causality’’ correlation. Information on the volume distribution of source strength, the spectrum from unit volume, and the local correlation volume can, in principle, be obtained by moving a specially designed pressure sensor around the jet. The pressure sensor is of an airfoil type, designed to minimize the projected area in the direction of radiation, and thereby the additional noise from the interaction of the turbulence with the sensor. Also, pressure measurement errors due to turbulent interference are reduced substantially with respect to those for classical cylindrical pressure probes. By integrating the radial distribution of source strength a ’’slice-wise’’ axial distribution is obtained; it is in qualitative agreement with results of other researchers. However, on integrating the axial distribution along the entire jet, the resulting total sound level was found to be substantially larger than that obtained by direct measurement. This paradox is explained as a consequence of spurious drag dipole radiation from the stem of the probe.