2014 · 20 citations · 11 references
Natural SciencesEarth SciencesOceanographyCoastal EngineeringCoastal OceanographyRemote SensingData Quality ControlRadar Data Quality ControlRadar InstrumentationRadar Signal ProcessingRadar SystemsCurrent Measurement Data ProcessingCurrent Velocity ProfilingCurrent Velocity SensingData Quality Control For Current MeasurementsFalse Alarm ReductionOutlier IdentificationQuality Control For Radar ObservationsRadar Quality Control
Ocean surface current data provided by shore-based High Frequency (HF) radar show sporadically non-realistic current vectors in some areas, particularly at the outer edges of the radar range. The present paper describes a quality control (QC) procedure which evaluates the data of an array-type HF radar system in near realtime and assigns a quality value on every single grid-cell measurement. The quality value can then be used to identify non-realistic measurements and remove them from the obtained current maps. This procedure was implemented on a pair of coastal radar systems of the University of South Florida during a measuring period of 9 months. It was observed that the method is very effective in removing occasional non-realistic measurements. In general, the WERA QC procedure has to be tuned to the specific local conditions of the system for optimal results and to have the right trade-off between correct outlier identification and false alarm rate according to the user requirements.
11
Wellen Radar (WERA): a new ground-wave HF radar for ocean remote sensing
Klaus-Werner Gurgel, G. Antonischki, H.-H. Essen et al. · Coastal Engineering · 1999 · 351 citations