Transactions of the Indian Ceramic Society · 2014 · 17 citations · 14 references
Natural SciencesMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsMaterials CharacterizationCeramic ProcessingCeramic ProductionCeramic TechnologyPowder MetallurgyPowder ProcessingStructural CeramicsComparative EvaluationCrystal Preferred OrientationCrystallographic Preferred OrientationHot Isostatic PressingHot PressingIsostatic PressingPreferred OrientationPressing
AbstractPolycrystalline transparent zinc sulphide (ZnS) monoliths were processed through chemical vapour deposition (CVD) followed by hot isostatic pressing (HIP) at 975oC and 135 MPa pressure (samples were designated as CVDHIP). Physico-chemical, microstructural and transmisson properties of the CVDHIP specimens were evaluated. The results were compared with ZnS specimens processed through an alternative route of powder encapsulation and hot isostatic pressing under identical conditions (samples were designated as PHIP). CVDHIP and PHIP ZnS specimens exhibited close to theoretical densities of 4.086 and 4.079 g.cm–3 respectively. HIPing of CVD samples exhibited a highly preferred orientation along (111) in comparison to powder HIPed samples. Microstructures exhibited similar grain sizes for CVDHIP and PHIP ZnS specimens, however, the morphology of grains was different with significant twinning in CVDHIP specimens. Transmission properties of CVDHIP were relatively high in comparison to PHIP samples and also exhibited multispectral transmission properties in the wavelength range of 0.4-10 µm.Keywords: Zinc sulphideChemical vapour depositionHot isostatic pressingPowder encapsulationOptical properties
14