Neutron Activation Analysis of Mercury, Copper and Arsenic in Marine Organisms

Hiroshi Hamaguchi, Rokurô Kuroda, Kyoichi Hosohara

Journal of the Atomic Energy Society of Japan / Atomic Energy Society of Japan · 1960 · 10 citations · 0 references

Concepts

Abstract

The mercury, copper and arsenic contents of some marine organisms have been determined by neutron activation. The irradiations were carried out in JRR-1 reactor, with neutron fluxes of about 3×1011 n/cm2/sec, and the irradiation lasted 23 days (intermittently, 5hr each day). After cooling for 2 days the sample was dissolved by treating with nitric-sulfuric acid and potassium permanganate in the presence of carriers. From the clear solution the mixed sulfides were separated from the bulk of the contaminating activities, and the arsenic and copper was dissolved out by treating successively with hot 6 N ammonium polysulfide and 6 N nitric acid, leaving the mercury sulfide unattacked. Further decontamination chemistry was carried out for each element. The amount of the element in the marine organisms was then determined by comparing 203Hg, 64Cu and 76As β-activities isolated from the sample with those from the monitor.The mean chemical yield was 40, 65 and 30% for mercury, copper and arsenic respectively, and the sensitivity of the method was Hg 1.5μg, Cu 0.03μg and As 0.04μg. The method has an advantage in that it makes possible to minimize the loss and contamination, which are the greatest obstacle in other analytical techniques for the determination of extremely minute amounts of these elements.