A Simple Implicit Model for Thermal Cracking of Crude Oils

J.P. Millour, R.G. Moore, D.W. Bennion, M.G. Ursenbach, D.N. Gie

SPE Annual Technical Conference and Exhibition · 1985 · 17 citations · 2 references

Concepts

Abstract

ABSTRACT Thermal cracking product distributions are presented for three oils (8°API, 13°API and 24°API). Tests were performed on oxidized and unoxidized samples (water and rock matrix present) at temperatures of 360°C, 397°C and 420°C for periods of time up to 48 hours. Product yields are reported as weight percent coke, asphaltenes, maltenes and non-condensible gas. Seven sets of experimental data are reported. Previous thermal cracking kinetic models have been unable to reproduce the following product distribution: The initial time delay in coke production.The early time transfer between maltenes and asphaltenes content. A simple implicit model which requires a small number of parameters has been developed. It gives a good match of all the experimental sets. The model consists of coke formation versus temperature relationship which contains two parameters; a temperature independent relationship between coke and maltenes; a temperature independent relationship relating coke and maltenes to asphaltenes; and a mass balance to calculate the amount of non-condensible gas. The model is simple to use and provides an excellent check for the consistency of experimental data. It can very easily be implemented into a numerical simulator.

References

2