Journal of Applied Physics · 2010 · 21 citations · 8 references
Natural SciencesMaterials EngineeringMaterials ScienceMagnetic MaterialsMaterials CharacterizationMetallurgyFerrimagnetic MaterialsFerromagnetic MaterialsMagnetic CharacterizationMagnetic Properties Of SolidsMagnetism In SolidsSinteringCompositionGrain Boundary BehaviorMagnetic AlloysMagnetic Grain SizeMagnetic Materials CharacterizationMagnetic PropertiesSegregationSintered Magnets
Sintered [Nd0.45(Y3Dy1)0.25∗0.55]2.8Fe14B magnets were prepared for the first time. Magnetic properties and microstructures of the magnets were investigated by magnetic measurements and electron microprobe analysis. The microstructure consists of a MRE2Fe14B (2-14-1) phase matrix having a grain size of ∼10 μm and a RE-rich grain boundary phase. However, sintering resulted in segregation of Y to the inner and Nd to the outside of the 2-14-1 grains. The magnet has a room temperature (BH)max of 25.4 MGOe, which is two times higher than that of the isotropic melt spun ribbons with similar compositions. The temperature coefficients of Br (α) and Hcj (β) for the magnet are −0.150 and −0.632%/°C from 27 to 127 °C, respectively. These temperature coefficients, especially for β, are also much higher than those of melt spun ribbons. The composition segregation in the 2-14-1 grains is believed to be responsible for the higher temperature coefficients.
8
High-energy product Nd-Fe-B permanent magnets
J. J. Croat, J. F. Herbst, R. W. Lee et al. · Applied Physics Letters · 1984 · 500 citations
Natural Sciences, Materials Engineering, Materials Science +17