Co-seeded Er^3+:Yb^3+ single frequency fiber amplifier with 60 W output power and over 90% TEM_00 content

Abstract

We report on the design and fabrication of an Er(3+):Yb(3+) triple clad fiber and on the power scaling of a single frequency fiber amplifier at 1.5 μm based on that fiber. In addition, we report on mode content measurements in order to reveal the overlap of the amplifier output with the TEM(00) mode. The triple clad design was used to enable high output power levels, a good slope efficiency and an excellent beam quality. A maximum single frequency output power of 61 W at 1.5 μm could be achieved with the aid of the co-seeding method, which was used to suppress parasitic processes at 1.0 μm. With a scanning ring cavity the mode content of the amplifier output was analyzed with respect to the TEM modes. For all output power levels the TEM(00) content was above 90%.