Physical review. B, Condensed matter · 1988 · 83 citations · 4 references
EngineeringMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetrologyFractal GeometryFracture CharacterizationFracture GeometryFracture MechanicsFracture ToughnessSurface MetrologyCorrelationFractal DimensionFractal Dimension RelationsFractal Surface AnalysisFractal Surfaces
This paper shows that the fractal dimension ${D}_{m}$ as determined by the perimeter-area relation is not the intrinsic fractal dimension ${D}_{0}$ of a fractured metal surface. The measured value of ${D}_{m}$ depends on the length of the yardstick used to measure the perimeter and has a quantitative relation with ${D}_{0}$. When the yardstick is small enough, ${D}_{m}$ approaches ${D}_{0}$. It is also shown that the origin of the negative correlation between ${D}_{m}$ and toughness of materials is that the yardstick used by many authors for measuring ${D}_{m}$ is too large. As we expected, a positive correlation is obtained when the length of the yardstick becomes smaller than a critical length of the side of the Koch generation. It seems hopeful to use fractals to characterize fractured surfaces with which material parameters can be correlated.
4
Ervin E. Underwood, K. Banerji · Materials Science and Engineering · 1986 · 224 citations
Fractal characterization of fractured surfaces
C. S. Pände, L.E. Richards, N. Louat et al. · Acta Metallurgica · 1987 · 198 citations