Fatigue & Fracture of Engineering Materials & Structures · 1979 · 119 citations · 31 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsMetallurgyDamage MechanicsDuctilityFatigueFracture MechanicsFracture PropagationWork HardeningAluminium AlloysCrack GrowthCrack Growth RateCrack PropagationCrystal FacetsFatigue Crack GrowthGrowth RatesSlow Crack Growth
Abstract— Fatigue crack growth and threshold behaviour have been examined in three commercial aluminium alloys in both air and vacuum environments. It was observed that, in air, the threshold stress intensity range Δ K t , varied linearly with the Δ K t ratio. In contrast Δ K , in vacuum was found to be independent of R. Over the whole growth rate range examined fatigue crack growth in vacuum was Δ K controlled and failure occurred by a dimple and ductile striation mechanism. This also applied to failure in the intermediate growth rate ranges in air. However, at slow growth rates in air, fatigue crack growth was structure sensitive and crystallographic facets were formed during the crack propagation process.
31
Fatigue crack closure under cyclic tension
W. Elber · Engineering Fracture Mechanics · 1970 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +14
Crack propagation in high stress fatigue
C. Laird, G. C. Smith · Philosophical magazine · 1962 · 500 citations
Crack extension by alternating shear
R. M. Pelloux · Engineering Fracture Mechanics · 1970 · 231 citations