Incorporation of surface‐modified UHMWPE powders and fibers in tough polyurethane composites

Matthew A. Williams, B.D. Bauman, D. A. Thomas

Polymer Engineering and Science · 1991 · 11 citations · 9 references

Concepts

Abstract

Abstract Ultrahigh molecular weight polyethylene (UHMWPE) powder (60 micron diameter) and chopped fiber (6.5 mm length) were surface treated with a blend of reactive gases (fluorine and oxygen.) These powders and fibers were then compounded into a thermoset polyurethane matrix. Surface‐treated and control reinforcements are compared at a 10 vol.% loading level. Tensile testing indicates improved stress transfer with surface treatment. Stress transfer is also improved with fibers versus powders. Fracture toughness is characterized by measuring the essential work of fracture, w e . Surface‐treated fiber composites exhibit work of fracture values almost three times the unfilled polyurethane values. Abrasion resistance was also measured. Surface treatment was found to significantly lower wear rates of powder composites. Fiber composites had lower wear rates than powder composites, although surface treatment had little effect. An approximate inverse relationship was found between wear rate and essential work of fracture.

References

9