A combined unit for viscosity, surface tension and density measurements in oxide melts

S. Vaisburd, D. G. Brandon

Measurement Science and Technology · 1997 · 20 citations · 4 references

Concepts

Abstract

A combined experimental unit for high-temperature viscosity, density and surface-tension measurements in oxide melts (glasses, metallurgical slags and coal ash) is described. The high-temperature viscometer is based on the Brookfield device whereas the density and surface-tension measurements are based on the maximum-bubble-pressure method. A vertical tube furnace is capable of reaching temperatures up to . An inert (argon) atmosphere allows the use of non-standard, molybdenum spindles for viscosity measurements and permits investigation of melts susceptible to oxidation. The ranges for the measured values are 0.1 - 460 Pa s for viscosity, for surface tension, and for density. Since the range of the pressure transducer can be changed for measurements of higher surface tension and density, the experimental unit can also be used for density and surface-tension measurements in liquid metals and mattes. These high-temperature measurements are accurate to within for viscosity, for surface tension and for density.

References

4