Low-Profile Tunable Dipole Antenna Using Barium Strontium Titanate Varactors

David Cure, T. Weller, Tony Price, Félix A. Miranda, F. W. Van Keuls

IEEE Transactions on Antennas and Propagation · 2014 · 24 citations · 21 references

Concepts

Abstract

In this paper, a 2.4 GHz low-profile dipole antenna that uses a frequency-selective surface (FSS) with interdigital barium strontium titanate (BST) varactor-tuned unit cells is presented. The tunable unit cell is a square patch with a small aperture on either side to accommodate the BST devices. The Ba <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.6</sub> Sr <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">0.4</sub> TiO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> varactors were fabricated on alumina substrates and demonstrate capacitance tuning of 1.5:1 (33%) at 90 V. The varactor chips were placed only along one dimension of the FSS to avoid the use of vias and simplify the dc-bias network. The measured data of the antenna demonstrate tunability from 2.23 to 2.55 GHz with a peak gain at broadside that ranges from 3 to 3.7 dBi, and instantaneous bandwidths of 50 to 160 MHz within the tuning range. The total antenna thickness is approximately λ/47.

References

21