Photoassisted Electrochemical Degradation of Organic Pollutants on a DSA Type Oxide Electrode: Process Test for a Phenol Synthetic Solution and Its Application for the E1 Bleach Kraft Mill Effluent

Abstract

In this paper, the performance of a photoassisted electrolysis process, for the degradation of organic pollutants, is investigated. Results obtained in this work have shown that the thermally prepared anode of titanium, coated with 70TiO2/30RuO2, exhibits photoactivity and may be used for the treatment of effluents. A synthetic phenol aqueous solution and a real paper mill industry effluent were treated. Kinetic analysis showed a synergetic effect of electrolysis and photocatalysis and degradation rates are an order of magnitude greater than the sum of the results reached by using both processes individually. Using a 125 W mercury bulb and 20 mA cm-2, the phenol concentration decayed 85% in 90 min and 70% reduction of TOC was obtained. In the application of the treatment process for the degradation of the E1 bleach Kraft mill effluent, total phenols were practically eliminated in a short period of processing time, and color, usually resistant to biological treatment, was reduced to 10% from its initial value measured in terms of absorbance. Reductions of AOX, COD, and BOD by 25%, 30%, and 35%, respectively, were also observed.