Materials Research Innovations · 1999 · 13 citations · 12 references
Natural SciencesMaterials EngineeringMaterials SciencePolymer ChemistryPolymer EngineeringPolymer MaterialsComposite MaterialsConducting PolymersDielectric MaterialsDielectricsPolymer CharacterizationThermogravimetric AnalysisComposite DielectricsGlass TransitionGlass Transition TemperatureGlass Transition Temperature DeterminationHybrid CompositesIonic ConductionIonic Conductivity In PolymersThermal Decomposition
Poly(acrylic acid) + zinc diacetate hybrid composites have been prepared by precipitation from aqueous solutions and drying. The lowest glass transition temperature Tg determined by differential scanning calorimetry (DSC) is 392°C, providing a service temperature range unusually large for polymer-based materials (PBMs). Thermogravimetric analysis (TGA) shows that thermal decomposition begins some 10–20 K above each Tg. The alternating current impedance was determined in the nitrogen atmosphere from 370°C to 530°C. Dynamic dielectric measurements were performed between 20°C and 350°C, also under nitrogen. In contrast to typical PBMs, there is evidence of ionic conduction in some of the composites. The dynamic dielectric properties depend on the composition. The materials obtained are usable in medical applications and as high durability low friction coatings.
12
R.D. Armstrong · Electrochimica Acta · 1988 · 1.9K citations
Liquid Crystalline Epoxy Thermosets
M. Giamberjni, Eugenio Amendola, Cosimo Carfagna · Molecular crystals and liquid crystals science technology. Section A, Molecular crystals and liquid crystals/Molecular crystals and liquid crystals science and technology. Section A, Molecular crystals and liquid crystals · 1995 · 68 citations
Natural Sciences, Materials Engineering, Materials Science +17