Journal of Applied Physics · 2000 · 88 citations · 20 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysMetalsStainless SteelsStrain HardeningX-ray CrystallographyX-ray DiffractionAnisotropic ExpansionAnisotropic StrainAustenitic Stainless SteelsAustenitic SteelsCrystallographic CharacterizationLattice ModelsPlasma Immersion Ion ImplantationYoung's Modulus
Nitrogen treatment of austenitic stainless steels at temperatures around 300–400 °C leads to the formation of a hard and corrosion resistant phase called expanded austenite. The most puzzling feature of this phase is an anisotropic lattice expansion where the expansion along the (100) is about 20% larger than for the (111) direction. In this report an investigation of the lattice expansion of austenitic stainless steel after nitrogen plasma immersion ion implantation by x-ray diffraction is presented. Pole figure measurements as well as θ/2θ scans at different polar angles were performed. Comparing the data with three different structural models, fcc, tetragonal, and triclinic, it can be concluded that none of them yields good agreement with the data, so that the crystallographic characterization is still open. However, a model for the atomic origin of the observed lattice expansion based on the anisotropic Young’s modulus, which is found for every fcc metal, is presented, showing good agreement with the measured data as well as data taken from the literature.
20
Physical Properties of Crystals
Materials Today · 2007 · 7.8K citations · Full text
Mark R. Daymond, M.A.M. Bourke, R. B. Von Dreele et al. · Journal of Applied Physics · 1997 · 308 citations
Natural Sciences, Materials Engineering, Materials Science +17