Surface and Interface Analysis · 2000 · 12 citations · 7 references
EngineeringMaterials EngineeringMaterials ScienceElectrochemistryRadiation MeasurementRadiation TransportBattery Cell ChemistryBattery MaterialsBattery SystemsElectrochemical CellsElectrochemical Energy StorageNeutron DetectionElectrochromic DevicesElectrochromic Thin FilmsElectrochromic WindowsIn-situ MeasurementsLithium-ion Battery MaterialsMultilayer Electrochromic StructuresRechargeable BatteriesSurface Barrier Detectors
Thin film ‘rocking-chair’ type cells hold great promise for ‘smart window’ and rechargeable battery applications. Smart windows alter the transmissivity between any two states over the solar spectrum by electrical current modulation, which causes lithium ions to migrate back and forth between the two electrochromic layers. This paper reports measurement of the lithium distribution in each layer and transport between layers by the method of neutron depth profiling (NDP). Samples are irradiated by a beam of ‘cold’ neutrons that induce the 6Li(n,α)3H reaction. Both the intensity and energy of the reaction products— the α-particles and tritons—are measured by surface barrier detectors. Comparing the emission intensity with that of a known standard leads to quantitative determination of the lithium concentrations. The energy loss of the emitted charged particles due to interactions with the matrix provides a direct measurement of the depth of the originating lithium nucleus. The non-destructive nature of the NDP technique allows in situ measurements of the lithium concentration under different voltage bias conditions. The data acquisition method and data analysis techniques are explained. Results of the concentration measurements as a function of bias are presented. Possible applications into other lithium multilayers are also discussed. Copyright © 2000 John Wiley & Sons, Ltd.
7