Modern Applied Science · 2010 · 11 citations · 2 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsStructural MaterialsComposite MaterialsFiber PropertiesFiber-reinforced CompositesMaterial PerformanceMaterial PropertiesMaterial TestingBrick Material CharacterizationBrick Strength TestingBrick Structural PerformanceCompressive StrengthLaboratory TestingPhysical PropertiesWater AbsorptionWater Absorption Capacity
The main aim of this study was to compare the physical properties and mechanical properties of Oil Palm Trunk (OPT) fibre and Oil Palm Fruit Bunches (OPFB) fibre reinforced laterite bricks. For comparison purposes, the properties such as dimension, density, water absorption and the compressive strength of both types of bricks were determined. The effects of the incorporation of various amounts of fibres on the above properties were analysed. The tests were carried out according to BS 3821: 1985 for clay bricks.The samples were pressed at the factory Majpadu Bricks Sdn. Bhd., Malaysia and tested at the Material Testing Laboratory, Universiti Teknologi MARA, Shah Alam, Malaysia.The findings of this research were, firstly, the dimension of bricks content with OPFB fibres were less accurate than bricks with OPT fibres. Secondly, the density of bricks with OPFB fibres was higher than the density of bricks with OPT fibres. Thirdly, in compressive strength of the bricks with OPFB fibres was higher than bricks with OPT fibres, with the maximum fibre content identified as 3 percent fibres. Finally, the water absorption of bricks with OPFB fibres was lower than the water absorption of bricks with OPT fibres. It can be concluded that the bricks with OPFB fibres had better physical and mechanical properties than bricks with OPT fibres.
2
Fibre cements and fibre concretes
Building and Environment · 1980 · 224 citations
Laterite soil engineering — Pedogenesis and engineering principles