Energy Procedia · 2013 · 51 citations · 9 references
EngineeringElectrical EngineeringCondition AssessmentPower ElectronicsRenewable Energy SystemsPhotovoltaic DevicesRenewable EnergyRenewable Energy Power ConversionSolar CellsSolar Energy SystemsSolar Photovoltaic SystemsMaximum OutputMaximum Power OutputOpen-circuit VoltagePhotovoltaic DegradationPhotovoltaic SystemsPower OutputShort-circuit CurrentSolar Cell Characterization
This paper proposes a method for the detection and assessment of the degradation of the photovoltaic modules electrical characteristics such as short-circuit current (Isc), open-circuit voltage (Voc) and maximum output power (Pmax). This work presents a standardization method for measurements of these characteristics in real conditions. Standardization is bringing back the measurements in real conditions to the corresponding values in standard test conditions (STC). Thus the standardized values of short-circuit current (Isc,stc), the open-circuit voltage (Voc,stc) and the maximum output power (Pmax) are compared with reference values corresponding to the first putting service of module or the manufacturer's data as in our case. The data collected on a platform of measurements installed at the University of Dakar in Senegal are used to validate our approach. A Period of one operation year of the PV module is considered. After one year of module operation, we note an average degradation of 10% for the short-circuit current, 2% for the open-circuit voltage. For the maximum output-power no degradation is yet detected at this stage.
9
Commonly observed degradation in field-aged photovoltaic modules
Michael A. Quintana, D.L. King, T. J. McMahon et al. · 2003 · 288 citations
Degradation analysis of weathered crystalline-silicon PV modules
C.R. Osterwald, A. Anderberg, S. Rummel et al. · 2003 · 128 citations · Full text
Boudy Bilal, Vincent Sambou, Cheikh Mouhamed Fadel Kébé et al. · Energy Procedia · 2012 · 116 citations · Full text
Agriculture, Environmental Engineering, Design Optimization +16