BioResources · 2013 · 23 citations · 5 references
ArtsMaterials EngineeringMaterials ScienceCeramic MaterialsCeramicsPapermakingCementitious MaterialsPaper FinishingBrightness ImprovementFiller MaterialsFly Ash-based MaterialsMineral FillerPaper PropertiesParticle Specific Surface AreaPorous Surface StructureSpecific Surface Area
A novel calcium silicate filler can be made from fly ash. This new filler, known as fly ash based calcium silicate (FACS), has a highly porous surface structure, high brightness (91% ISO), low bulk density (0.31 g/cm3), and high specific surface area (121 m2/g). In this paper, its potential application as a paper filler was studied and its effect on drainage, retention, and paper properties was investigated. The results from dynamic drainage tests showed that FACS had similar drainage and retention behaviors to the conventional precipitated calcium carbonate (PCC). Physical tests indicated that FACS-filled paper had higher tensile, burst, and tear indices, but lower brightness and opacity than those loaded with PCC. A more important finding was that the bulk of paper can be increased by 56.4% with 20% FACS content in paper relative to the control (no filler addition).
5
Using calcium carbonate whiskers as papermaking filler
Xiaoyu Chen, Xueren Qian, Xianhui An · BioResources · 2011 · 45 citations · Full text
Hongjie Zhang, Zhibin He, Yonghao Ni et al. · Appita Journal: Journal of the Technical Association of the Australian and New Zealand Pulp and Paper Industry · 2007 · 10 citations