Journal of Physics Conference Series · 2014 · 21 citations · 11 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMetallurgyNanomaterialsElectron MicroscopyMagnetic OxidesMetal OxidesNanomaterial CharacterizationSteel MaterialsTransmission Electron MicroscopyHigh-temperature StabilityOxide Dispersion Strengthened SteelsOxide Dispersion StrengtheningOxide Dispersion-strengthened AlloysOxide Layer MorphologyOxide MagnetismTemperature StabilityTitanium Oxides
Oxide dispersion strengthened steels owe part of their high temperature stability to the nano-scale oxides they contain. These yttrium-titanium oxides are notoriously difficult to characterise since they are embedded in a magnetic-ferritic matrix and often <10 nm across. This study uses correlated transmission electron microscopy and atom probe tomography on the same material to explore the kind of information that can be gained on the character of the oxide particles. The influence of chromium in these alloys is of interest, therefore two model ODS steels Fe-(14Cr)-0.2Ti-0.3Y2O3 are compared. TEM is shown to accurately measure the size of the oxide particles and atom probe tomography is necessary to observe the smallest sub-1.5 nm particles. Larger Y2Ti2O7 and Y 2TiO5 structured particles were identified by high-resolution transmission electron microscopy, but the smallest oxides remain difficult to index. Chemical data from energy-filtered TEM agreed qualitatively with the atom probe findings. It was found that the majority of the oxide particles exhibit an unoxidised chromium shell which may be responsible for reducing the ultimate size of the oxide particles. © Published under licence by IOP Publishing Ltd.
11