Polymer International · 2007 · 34 citations · 19 references
Natural SciencesMaterials EngineeringMaterials ScienceMaterials CharacterizationMechanical Behavior Of MaterialsStructural MaterialsComposite MaterialsFiber-reinforced CompositesMaterial PropertiesMechanics Of Composite MaterialsNanocompositesPolymer CompositesEnergy Dispersive X-ray SpectroscopyEnergy-dispersive X-ray SpectroscopyEpoxy Matrix CompositesEpoxy ResinsField EmissionFlexural BehaviorGlass Fiber Reinforced CompositesMechanical Properties Of Nanocomposites
Abstract Epoxy composites filled with glass fiber and organo‐montmorillonite (OMMT) were prepared by the hand lay‐up method. The flexural properties of the epoxy/glass fiber/OMMT composites were characterized by a three‐point bending test. The flexural modulus and strength of epoxy/glass fiber were increased significantly in the presence of OMMT. The optimum loading of OMMT in the epoxy/glass fiber composites was attained at 3 wt%, where the improvement in flexural modulus and strength was approximately 66 and 95%, respectively. The fractured surface morphology of the epoxy/glass fiber/OMMT composites was investigated using field emission scanning electron microscopy. It was found that OMMT adheres on the epoxy/glass fiber interface, and this is also supported by evidence from energy dispersive X‐ray analysis. Copyright © 2007 Society of Chemical Industry
19
Synthesis and characterization of maleated polyethylene/clay nanocomposites
Ki Hyun Wang, Min Ho Choi, Chong Min Koo et al. · Polymer · 2001 · 441 citations
Natural Sciences, Materials Engineering, Materials Science +12