Journal of The Electrochemical Society · 1992 · 92 citations · 0 references
EngineeringChemistryNuclear EngineeringElectrochemistryNuclear ChemistryNuclear MaterialsActinide ChemistryActinide MaterialsElectrochemical Energy ConversionNuclear Fuel ChemistryNuclear Fuel MaterialsNuclear Waste FormsElectrolyte CompositionFission Product SeparationMetallic FuelNuclear Fuel ReprocessingPlutonium ReprocessingReagent ConsumptionSpent Fuel ChemistryUranium Removal
A unique pyrochemical process uses electrotransport through molten eutectic salt to separate metallic nuclear fuel from fission products, minimizing reagent consumption and waste volume. The goal is to recover and reuse nearly all actinides from IFR spent fuel while disposing of wastes satisfactorily. The study uses electrotransport to solid cathodes to isolate pure uranium, adjusting electrolyte composition for subsequent plutonium‑rich recovery, and reports experiments, thermodynamic analysis, and model comparisons of actinide and rare‑earth behavior. The results confirm that nearly pure uranium recovery is a key step in the IFR pyrochemical fuel‑processing strategy.
A unique pyrochemical process is being developed for separation of metallic nuclear fuel from fission products by electrotransport through molten eutectic salt to solid and liquid metal cathodes. The process will allow recovery and reuse of essentially all of the actinides in spent fuel from the integral fast reactor (IFR) and disposal of wastes in satisfactory forms. Electrotransport is used to minimize reagent consumption and, consequently, waste volume. In particular, electrotransport to solid cathodes is used for recovery of an essentially pure uranium product in the presence of other actinides; removal of pure uranium is used to adjust the electrolyte composition in preparation for recovery of a plutonium‐rich mixture with uranium in liquid cadmium cathodes. This paper presents (i) experiments that delineate the behavior of key actinide and rare‐earth elements during electrotransport to a solid electrode over a useful range of ratios in the electrolyte, (ii) a thermodynamic basis for that behavior, and (iii) a comparison of the observed behavior with that calculated from a thermodynamic model. This work clearly establishes that recovery of nearly pure uranium can be a key step in the overall pyrochemical‐fuel‐processing strategy for the IFR.