Journal of Physics D Applied Physics · 1976 · 166 citations · 17 references
EngineeringMaterials EngineeringMaterials ScienceGeotechnical EngineeringMechanical Behavior Of MaterialsRheologyDamage MechanicsFracture GeometryFracture MechanicsFracture PropagationGlass MaterialsStress-strain BehaviorCracking BehaviorCracksFracture Of GlassesGlass Fracture BehaviorIndentation MechanicsMechanical Properties Of GlassesPlastic FlowStress-strain Curve
The indentation experiment was monitored with an inverted microscope, producing stress–strain curves, and radial cracking was modeled as a composite Hertzian loading field coupled with cavity expansion at the free surface. For indenters smaller than ~1 mm, spherical indentation of glass produces plastic flow and Hertzian cone cracking, and on unloading a sequence of radial and later lateral cracks develops, with stress–strain curves fitting recent correlation expressions and the proposed model agreeing with experiment.
A systematic study of spherical indentations on various glasses has shown that for small indenters (<or approximately=1 mm) plastic flow as well as Hertzian cone cracking occurs. What is of more interest however, is that on unloading, a series of radial cracks forms about the area of contact. With continued unloading, these cracks grow and just before complete unloading, an entirely independent system of lateral cracks, which are responsible for material removal processes, occurs. The indentation process was followed using an inverted microscope and indentation stress-strain curves were produced. These curves were compared with recent indentation correlation expressions and found to fit reasonably well. The radial cracking about the contact site was analysed in terms of a stress field which was a composite of the normal Hertzian loading situation coupled with the expansion of a cavity adjacent to a free surface. This model agrees reasonably well with experiment and provides a qualitative treatment of lateral cracking phenomena.
17