MATERIALS TRANSACTIONS · 2007 · 26 citations · 24 references
Natural SciencesMaterials EngineeringMaterials ScienceMechanical Behavior Of MaterialsMetallic MaterialsMetallurgyAlloysCorrosion ResistanceCorrosion TestingCorrosion-resistant MaterialsMetalsStress Corrosion CrackingAluminium AlloysAluminum Alloy CorrosionAluminum AlloysCorrosion Of Aluminum AlloysDislocation NetworksMicrostructure Effects On CorrosionStress Corrosion Cracking ResistanceTensile Strength
The high strength Al-Zn-Mg alloy used in the aerospace industry is strengthened by coherent G.P. zones and semicoherent η′ phase. However, this series of aluminum alloys are susceptible to stress corrosion cracking (SCC), particularly when aged to the peak-aged state of T6 temper. In this study, the effect of microstructure on mechanical properties and stress corrosion cracking of the alloy was investigated for alloys tempered to T6, RRA, Two-Step and T7 conditions by tensile test in air, SCC test and polarization test in a 3.5%NaCl solution. It is shown that the improvement in SCC resistance correlates very well with the size of matrix precipitates and grain boundary precipitates. T7 temper can produce larger sizes of both the matrix precipitates and grain boundary precipitates than that of T6, RRA and Two-step tempers, causing a decrease in the length and density of dislocation lines, which results in the decrease of stress concentration at grain boundary and greatly improving the SCC resistance. The addition of Sc and Zr to high strength Al-Zn-Mg alloys has been found to simultaneously improve the tensile strength and SCC resistance.
24
Jostein Røyset, N. Ryum · International Materials Reviews · 2005 · 915 citations
Natural Sciences, Materials Engineering, Materials Science +17
Stress corrosion cracking and hydrogen embrittlement of an Al–Zn–Mg–Cu alloy
Renguo Song, W. Dietzel, Baoze Zhang et al. · Acta Materialia · 2004 · 291 citations
Natural Sciences, Materials Engineering, Materials Science +14