Energy & Fuels · 2003 · 61 citations · 15 references
Natural SciencesChemical EngineeringChemistryCatalysisIndustrial ChemistryReaction EngineeringCatalyst DesignCatalytic MaterialsCatalytic Reaction EngineeringCatalytic Reactor DesignIndustrial CatalysisIndustrial Catalytic ProcessesCatalyst OptimizationLow-temperature SynthesisMethanol Synthesis CatalysisSyngas Production
Continuous low-temperature methanol synthesis from syngas containing CO 2 on various Cu/ZnO catalysts was investigated by using a semibatch autoclave reactor. Methanol was easily produced at a temperature as low as 443 K and with a pressure of 50 bar with the aid of 2-butanol, which showed a very high efficiency with a one-pass yield of 47.0% and a selectivity of 98.9%. Methanol itself used as alcohol promoter exhibited a higher activity than other 1-alcohols because it has the lowest spatial effect. 2-Alcohols, however, exhibited the highest conversion among the same carbon number because of its well-balanced effects produced by their of electronic and spatial factors. The one-pass conversion was improved by increasing the catalyst weight because no thermodynamic limitations existed at low temperatures. The continuous low-temperature methanol synthesis is a very promising process because completely purified syngas is not necessary.
15
G.C. Chinchen, P.J. Denny, J.R. Jennings et al. · Applied Catalysis · 1988 · 606 citations
On the determination of copper surface area by reaction with nitrous oxide
J. W. Evans, Mark Wainwright, A.J. Bridgewater et al. · Applied Catalysis · 1983 · 418 citations
Chemical equilibria in methanol synthesis
G.H. Graaf, P.J.J.M. Sijtsema, Eize J. Stamhuis et al. · Chemical Engineering Science · 1986 · 385 citations