Solution phase synthesis and intense pulsed light sintering and reduction of a copper oxide ink with an encapsulating nickel oxide barrier

Abstract

Copper oxide nanoparticle inks sintered and reduced by intense pulsed light (IPL) are an inexpensive means to produce conductive patterns on a number of substrates. However, the oxidation and diffusion characteristics of copper are issues that must be resolved before it can be considered as a viable solution. Nickel can provide a degree of oxidation protection and act as a barrier for the diffusion of copper. In the present study we have for the first time synthesized copper oxide with an encapsulating nickel oxide nanostructure using a solution phase synthesis process in the presence of a surfactant at room temperature. The room temperature process enables us to easily prevent the formation of alloys at the copper-nickel interface. The synthesis results in a simple technique (easily commercializable, tested at a 10 g scale) with highly controllable layer thicknesses on a 20 nm copper oxide nanoparticle. These Cu(2)O@NiO dispersions were then directly deposited onto substrates and sintered/reduced using an IPL source. The sintering technique produces a highly conductive film with very short processing times. Films have been deposited onto silicon, and the copper-nickel structure has shown a lower copper diffusion. The nanostructures and resulting films were characterized using electron and x-ray spectroscopy, and the films' resistivity was measured.