ISIJ International · 1991 · 10 citations · 0 references
EngineeringMining EngineeringBlastingHeat TransferThermal AnalysisBlock ModelingHeat ControlBlast BurdenBlast Furnace TechnologyBlast FurnacesBlast Hole BurdenBurdenBurden DesignHorizontal Stress DistributionMelting
The influences of the inner wall profile and ore/coke distribution on the descending and melting behaviors of burden were analyzed by using a three-dimensional semicircular warm modei of the blast furnace under conditions set as similar as possible to the physical phenomena in the furnace. It is confirmed that in the case of a profile with blocks installed on the belly wherethe horizontal stress acting to wall is at its maximum, a sluggishly descending zone of a thickness 2-5 times of the projecting length of the blocks is formed near the wall just above the blocks. It is estimated that the thickness of sluggishly descending zone near the wall increases with increasing projecting length of the blocks on the wall and with decreasing installation interval of distance betweenthe blocks and it decreases with increasing ore/coke near the wall.