Boost-Amplifier-Based Power-Hardware-in-the-Loop Simulator

Kapil Jha, Santanu Mishra, Avinash Joshi

IEEE Transactions on Industrial Electronics · 2015 · 25 citations · 23 references

Concepts

Abstract

Power-hardware-in-the-loop (PHIL) simulations are used to test power hardware with the help of computer-based real-time simulations. Generally, buck-based power amplifiers that have good dynamic performance are used to construct a PHIL simulator because of their linear large signal control-to-output characteristics. However, their output voltage peak is limited to the applied dc input in the linear region of modulation. In this paper, a differential boost converter (DBC)-based power amplifier is proposed for PHIL simulations, which does not suffer from the aforementioned limitations of a buck-based amplifier. A conventional DBC exhibits highly nonlinear control-to-output behavior. A feedback linearization technique is used to linearize the DBC in a large signal and dynamic sense, which makes it suitable for PHIL applications. Using this power amplifier and a MATLAB/Simulink toolbox for real-time simulations, the PHIL simulator is constructed. Experimental results under various operating conditions of source voltages, such as unipolar, bipolar, transients in frequency, and the dc step, and various load conditions, such as reactive, nonlinear, and transient faults, are provided to confirm the effmicacy of the proposed PHIL simulator.

References

23