The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · 2007 · 70 citations · 25 references
Natural SciencesMaterials EngineeringMaterials ScienceNanomaterialsNanotechnologySolid State PhysicsNanomechanicsNanowiresPlastic DeformationPlasticityStress RelaxationStress-strain BehaviorCore-shell NanostructuresCore-shell NanowiresDislocation NucleationGradient PlasticityMetal NanowiresMisfit DislocationsStrain GradientStrain-gradient Plasticity
During fabrication of metal nanowires, an oxide layer (shell) that surrounds the metal (core) may form. Such an oxide-covered nanowire can be viewed as a cylindrical core/shell nanostructure, possessing a crystal lattice mismatch between the core and shell. Experimental evidence has shown that, in response to this mismatch, mechanical stresses induce plastic deformation in the shell and misfit dislocations nucleate at the core/shell interface. As a result, the mechanical, electrical and optoelectronic properties of the nanowire are affected. It is therefore essential to be able to predict the critical conditions at which misfit dislocation nucleation at the nanowire interface takes place and the critical applied load at which the interface begins deforming plastically. Two approaches are explored in order to analyze the stress relaxation processes in these oxide-covered nanowires: (i) energy considerations are carried out within a classical elasticity framework to predict the critical radii (of the core and shell) at which dislocation nucleation takes place at the nanowire interface; (ii) a strain gradient plasticity approach is applied to estimate the flow stress at which the interface will begin deforming plastically (this stress is termed “interfacial-yield” stress). The interfacial-yield stress, predicted by gradient plasticity, depends, among other material parameters, on the radii of the core and shell. Both approaches demonstrate how the geometric parameters of nanowires can be calibrated so as to avoid undesirable plastic deformation; in particular, method (i) can give the radii values that prevent misfit dislocation formation, whereas method (ii) can provide, for particular radii values, the critical stress at which interface deformation initiates.
25
Epitaxial core–shell and core–multishell nanowire heterostructures
Lincoln J. Lauhon, Mark S. Gudiksen, Deli Wang et al. · Nature · 2002 · 2.1K citations
Natural Sciences, Materials Engineering, Materials Science +14
The physics of plastic deformation
Elias C. Aifantis · International Journal of Plasticity · 1987 · 999 citations
Fernando Patolsky, Charles M. Lieber · Materials Today · 2005 · 694 citations · Full text