Structural Behavior of Flexible Pipe Carcass During Launching

Clóvis de Arruda Martins, Celso P. Pesce, José Augusto Penteado Aranha

2003 · 25 citations · 0 references

Concepts

Abstract

The interlocked carcass of a flexible pipe, besides being designed to withstand hydrostatic and squeezing loads applied by the tensioned armor layers, must resist to localized loads applied by caterpillars during the launching operation. Load distribution is dependent on the number of tensioners and on their geometry, as well as on the properties of external plastic layers and cross section design. Being the winding pitch of an interlocked carcass small enough and considering that the plastic layers extrusion process provides some confinement to this structure, one may consider, at least as a first approach, an equivalent pipe to model the structural behavior for radial loads. Any alternative approach, as a finite element model, would depend on a difficult assessment of parameters, as those related to the internal contact problem. Recovering classical results from the theory of elasticity, the structural behavior is formulated, for a general radial load distribution. The instability problem is also addressed. Despite the simplicity of such a model, results agree quite well with experiments conducted under controlled conditions. Applied to a typical carcass, the model predicts a safe behavior regarding instability and recovers elastic deformation as a function of a general dimensionless load parameter.