Optical and adhesive properties of dust deposits on solar mirrors and their effects on specular reflectivity and electrodynamic cleaning for mitigating energy-yield loss

Malay K. Mazumder, Julius Yellowhair, Jeremy Stark, Calvin Heiling, John N. Hudelson, Fang Hao, Hannah Gibson, Mark N. Horenstein

Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · 2014 · 11 citations · 10 references

Concepts

Abstract

Large-scale solar plants are mostly installed in semi-arid and desert areas. In those areas, dust layer buildup on solar collectors becomes a major cause for energy yield loss. Development of transparent electrodynamic screens (EDS) and their applications for self-cleaning operation of solar mirrors are presented with a primary focus on the removal dust particles smaller than 30 µm in diameter while maintaining specular reflection efficiency &lt; 90%. An EDS consists of thin rectangular array of parallel transparent conducting electrodes deposited on a transparent dielectric surface. The electrodes are insulated from each other and are embedded within a thin transparent dielectric film. The electrodes are activated using three-phase high-voltage pulses at low current (&lt; 1 mA/m<sup>2</sup> ). The three-phase electric field charges the deposited particles, lifts them form the substrate by electrostatic forces and propels the dust layer off of the collector’s surface by a traveling wave. The cleaning process takes less than 2 minutes; needs energy less than 1 Wh/m<sup>2</sup> without requiring any water or manual labor. The reflection efficiency can be restored &gt; 95% of the original clean-mirror efficiency. We briefly present (1) loss of specular reflection efficiency as a function of particle size distribution of deposited dust, and (2) the effects of the electrode design and materials used for minimizing initial loss of specular reflectivity in producing EDS-integrated solar mirrors. Optimization of EDS by using a figure of merit defined by the ratio of dust removal efficiency to the initial loss of specular reflection efficiency is discussed.

References

10