In-vitro investigation of magnetron-sputtered coatings based on silicon-substituted hydroxyapatite

Abstract

Silicon-containing calcium phosphate (Si-CaP) coatings on titanium and austenite steel substrates have been prepared by method of high-frequency magnetron sputtering. The powder of silicon-containing hydroxyapatite Ca10(PO4)6 − x (SiO4) x (HO)2 − x (Si-HA), where x = 0.5 obtained using a mechanochemical technique, was used as a target material. The obtained coatings were X-ray amorphous; the elemental composition of the coatings depended on the composition of the target to be sputtered. The coatings were heated in air for 3 hours to the temperature 700°C with the aim of changing their structure. The bioactivity of the coatings was studied using in-vitro tests. The solution of the simulated body fluid (SBF) oversaturated with respect to HA was used as a model medium. The phase elemental composition and morphology of the deposited and annealed Si-CaP coatings before and after submersion into the solution were controlled using the methods of X-ray diffraction (XRD), energy-dispersive X-ray analysis (EDAX), and scanning electron microscopy (SEM). According to the XFA and IR-spectroscopy data, heat treatment in the air yields the formation of an apatite-like phase in the coating. Thermostating of “metal + coating” specimens in the solution of simulated body fluid revealed that all obtained coatings were biologically active, and a calcium phosphate layer was formed on the coating surface during mineralization. The annealed coatings show a higher chemical stability under physiological conditions as compared to amorphous coatings.