JSME International Journal Series B · 2004 · 15 citations · 11 references
EngineeringMaterials ScienceHeat TransferHydraulicsMultiphase FlowFluid PropertiesHydraulic StructuresPressure Drop PredictionReactor Core DesignThermal-hydraulic ControlThermal-hydraulic Safety AnalysisCore Thermal-hydraulic DesignCore Thermal-hydraulic ResponseFriction Loss ReductionHydraulic DiameterHydraulic Diameter EffectsPressure DropPressure Drop BehaviorReactor Thermal-hydraulic Modeling
The reduced-moderation water reactor (RMWR) consists of several distinctive structures; a triangular tight-lattice configuration and a double-flat core. In order to design the RMWR core from the point of view of thermal-hydraulics, an evaluation method on pressure drop characteristics in the rod bundles at the tight-lattice configuration is required. In this study, calculated results by the Martinelli-Nelson's and Hancox's correlations were compared with experimental results in 4×5 rod bundles and seven-rod bundles. Consequently, the friction loss in two-phase flows becomes smaller at the tight-lattice configuration with the hydraulic diameter less than about 3mm. This reason is due to the difference of the configuration between the multi-rod bundle and the circular tube and due to the effect of the small hydraulic diameter on the two-phase multiplier.
11
Average Volumetric Concentration in Two-Phase Flow Systems
N. Zuber, J. A. Findlay · Journal of Heat Transfer · 1965 · 2.5K citations