Mean Adsorption Lifetime of Rb on Etched Tungsten Single Crystals: Ions

Floyd Hughes, H. J. Levinstein

Physical Review · 1959 · 124 citations · 20 references

Concepts

Abstract

Using an interrupted atomic beam technique, the mean adsorption lifetime, ${\ensuremath{\tau}}_{i}$, has been measured for Rb ions adsorbed on an "essentially clean," etched tungsten surface. Etching produced a homogeneous surface with a uniform work function. An estimated 90% of the surface consisted of microcrystal facets of the same crystallographic plane. The maximum Rb concentration was about ${10}^{10}$ atoms/${\mathrm{cm}}^{2}$.The data may be represented by the equation ${\ensuremath{\tau}}_{i}={{\ensuremath{\tau}}_{i}}^{0}\mathrm{exp}(\frac{{Q}_{i}}{\mathrm{kT}})$, in the region $1100<T<1300\ifmmode^\circ\else\textdegree\fi{}$K. The weakly temperature-dependent term ${{\ensuremath{\tau}}_{i}}^{0}$ appears to be affected by the shape, near the minima, of the ionic potential barrier of height ${Q}_{i}$.Lifetime measurements indicated that ${{\ensuremath{\tau}}_{i}}^{0}$ and ${Q}_{i}$ are strongly affected by the physical state of the metal and by the type and degree of contamination. It was found that ${{\ensuremath{\tau}}_{i}}^{0}$ as well as ${Q}_{i}$ must be used in characterizing "chemical" adsorption processes.

References

20