Experimental Study on the Impact of Perforations on Hydraulic Fracture Tortuosity

Robert van de Ketterij, C. J. de Pater

SPE European Formation Damage Conference · 1997 · 38 citations · 6 references

Concepts

TL;DR

Scaled model tests were conducted to examine how completion and treatment parameters affect near‑wellbore geometry in highly deviated, cased perforated wellbores. Casing instrumentation measured fluid‑flow‑induced pressure on the borehole wall, revealing that extensive flow before fracture creates an open‑hole condition at initiation, while limited flow confines initiation to perforations; stress calculations with a simple analytical model quantified how perforation angle influences initiation pressure and fracture propagation. Experiments with 90° perforation phasing showed that perforations on the borehole top most often served as fracture initiation sites.

Abstract

Abstract We performed scaled model tests to study the relation between completion and treatment parameters and the near wellbore geometry for highly deviated, cased perforated wellbores. We have instrumented our casings to observe the moment fluid flow around the casing causes a significant increase in the amount of pressure acting on the wall of the borehole. When fluid flow around the liner occurs extensively before fracture initiation, this leads effectively to an open hole situation at the moment of initiation. Otherwise the perforations will be the only possible initiation sites. In our experiments with a perforation phasing of 90° the perforations on top of the borehole acted in most cases as initiation sites. We performed stress calculations with a simple analytical model to understand the influence of the perforation angle on initiation pressure and fracture propagation.

References

6