University of North Texas Digital Library (University of North Texas) · 2002 · 17 citations · 0 references
Open access
Natural SciencesMaterials EngineeringMaterials ScienceCombustionCorrosion ScienceMetallurgyAlloysCorrosion TestingCorrosion-resistant MaterialsFire TestingFire-resistant MaterialsMetalsAsh-induced CorrosionCoal Ash CompositionCorrosion In Combustion EnvironmentsCorrosion ProcessesCorrosion ProductsHigh-temperature Corrosion TestingMechanical Integrity AssessmentTemperature Dependence Of Corrosion Rates
structural alloys in the presence of mixtures of synthetic coal ash, alkali sulfates, and alkali chlorides. Candidate alloys are also exposed in a small-scale coal-fired combustor at the National Energy Technology Laboratory in Pittsburgh. Experiments in the present program, which addresses the effects of deposit chemistry, temperature, and alloy chemistry on the corrosion response of alloys, were conducted at temperatures in the range of 575-800°C for time periods up to ≈1850 h. Alloys selected for the study included HR3C, 310TaN, HR120, SAVE 25, NF709, modified 800, 347HFG, and HCM12A. In addition, 800H clad with Alloy 671 was included in several of the exposures. Data were obtained on weight change, scale thickness, internal penetration, microstructural characteristics of corrosion products, mechanical integrity, and cracking of scales. Results showed that relationship of corrosion rates to temperature followed a bell-shaped curve, with peak rates at ≈725°C, but the rate itself was dependent on the alloy chemistry. Several alloys showed acceptable rates in the sulfate-containing coal-ash environment; but NaCl in the deposit led to catastrophic corrosion at 650 and 800°C. Background Conceptual designs of advanced combustion systems that utilize coal as feedstock must include improved thermal efficiency and significant reduction in release of sulfur oxides, nitrogen oxides, and carbon dioxide. Such systems require materials and components that are capable of operating at much higher temperatures than those found in current coal-fired power plants. Component reliability and long-term, trouble-free performance of structural materials for these systems necessitate