On the generation of a helicopter aerodynamic database

Markus Raffel, Fabrizio De Gregorio, Klaus de Groot, Oliver Schneider, Wanan Sheng, G. Gibertini, A. Séraudie

The Aeronautical Journal · 2011 · 29 citations · 14 references

Concepts

TL;DR

The GOAHEAD consortium was established under an EU project to develop an experimental database for validating 3D‑CFD and aeromechanics methods in predicting unsteady viscous flows around complete helicopter configurations, including rotor dynamics and viscous phenomena such as flow separation and laminar‑to‑turbulent transition. Its goal is to create this database to enable validation of 3D‑CFD and comprehensive aeromechanics models for unsteady viscous flow prediction. Wind‑tunnel tests were conducted over two weeks on a Mach‑scaled modern transport helicopter model in a closed test section, measuring global rotor and fuselage forces, steady and unsteady pressures, transition and separation points, velocity profiles, wake fields, vortex trajectories, and blade deformations to provide controlled boundary conditions for CFD validation.

Abstract

Abstract The GOAHEAD (Generation of an Advanced Helicopter Experimental Aerodynamic Database for CFD code validation) consortium was created in the frame of an EU-project in order to create an experimental database for the validation of 3D-CFD and comprehensive aeromechanics methods for the prediction of unsteady viscous flows. This included the rotor dynamics for complete helicopter configurations, i.e. main rotor – fuselage – tail rotor configurations with emphasis on viscous phenomena like flow separation and transition from laminar to turbulent flow. The wind tunnel experiments have been performed during two weeks in the DNW-LLF on a Mach-scaled model of a modern transport helicopter consisting of the main rotor, the fuselage, control surfaces and the tail rotor. For the sake of controlled boundary conditions for later CFD validation, a closed test section has been used. The measurement comprised global forces of the main rotor and the fuselage, steady and unsteady pressures, transition positions, stream lines, position of flow separation, velocity profiles at the test section inlet, velocity fields in the model wake, vortex trajectories and elastic deformations of the main and tail rotor blades.

References

14