Acta Odontologica Scandinavica · 2005 · 36 citations · 22 references
DentistryDental Biomaterials ScienceDental Materials ScienceDental MaterialsMechanical Properties Of Dental MaterialsPolymer EngineeringAcrylic Resin MaterialsDental PolymersDenture Base MaterialsDenture Teeth MaterialsStrength PropertiesBond StrengthHeat-cured PolymersLinersSilicone Elastomer MaterialsSoft Denture LinersSoft Liner MaterialsTensile Bond StrengthTensile Strength
OBJECTIVE: To investigate the effect of storage duration on the tensile bond strength of acrylic and silicone-based denture base materials with liners either heat-cured or auto-cured. MATERIAL AND METHODS: The denture liners investigated were Vertex soft (acrylic-based, heat-cured), Coe soft (acrylic-based, auto-cured), Molloplast-B (silicone-based, heat-cured), and Mollosil plus (silicone-based, auto-cured). The soft liner specimens were 10 x 10 x 3 mm and were processed between two PMMA blocks. They were tested following immersion in water at 37 degrees C for 1 day, 1 week, and 1, 3, and 6 months. Tensile bond strength was measured using a universal testing machine (Testometric Micro 500) at a crosshead speed of 20 mm/min (n = 10 specimens per experimental group). Multiple ANOVA and Tukey HSD were used to analyse the data at a pre-set alpha of 0.05. RESULTS: The results indicate that the tensile bond strength of acrylic-based soft liners is greater than that of silicone-based materials. The bond strength of all lining materials decreases with storage duration; the decrease being greatest for the acrylic-based soft liners. The decrease in bond strength of the auto-cured materials is greater than that of the heat-cured products. CLINICAL SIGNIFICANCE: Comparison of the materials in this study indicates that the silicone-based, heat-cured soft liner is superior, based on the tensile bond strength property. Use of silicone-based, heat-cured soft liners may provide better clinical success over a long period. These laboratory results need to be verified by clinical testing.
22
Bond strength and failure analysis of lining materials to denture resin
Hakan Terzioğlu, A. E. Akinay, Kezban Ulubayram et al. · Dental Materials · 1999 · 134 citations · Full text