Canadian Geotechnical Journal · 2012 · 41 citations · 17 references
EngineeringCivil EngineeringGeological EngineeringConstruction TechnologyGeotechnical EngineeringSoil MechanicsCulvert DesignEarth PressureEarth ReinforcementGeotechnical DesignIn-situ TestingContact Pressure AnalysisContact Pressure DistributionCulvert HydraulicsDead Load AnalysisEarth Pressure AnalysisEarth Pressure During ExcavationField Data CollectionGeotechnical Characterization
Earth pressure data from the field instrumentation of a cast-in-place reinforced rectangular box culvert are presented in this paper. The instrumented culvert is a 2.60 m by 3.60 m double-cell reinforced cast-in-place rectangular box buried under 25.10 m of fill constructed using the induced trench installation (ITI) method. The average earth pressure measured across the roof was 0.42 times the overburden pressure, and an average of 0.52 times the overburden pressure was measured at mid-height of the culvert on the sidewalls. Base contact pressure under the rectangular box culvert was also measured, providing field-based data demonstrating increased base pressure resulting from downward drag forces developed along the sidewalls of the box culvert. An average increase of 25% from the measured vertical earth pressures on the roof plus the culvert dead load (DL) pressure was calculated at the culvert base. A model culvert was also tested in a geotechnical centrifuge to obtain data on earth pressures at the top, sides, and base of the culvert. The data from the centrifuge testing were compared with the prototype structure, and the centrifuge test results agreed closely with the measured field prototype pressures, in spite of the fact that full similitude was not attempted in centrifuge testing.
17
Transportation Research Record
Anne Vingaard Olesen, Erik Kjems, Kristian Hegner Reinau et al. · 2016 · 11.4K citations
Bryan E. Little, Theodore A. Mize, Robert J. Bailey · 2000 · 1.1K citations