Link adaptation strategy for IEEE 802.11 WLAN via received signal strength measurement

Jd.P. Pavon

2004 · 398 citations · 7 references

Concepts

TL;DR

IEEE 802.11 WLANs support multiple transmission rates, but the rate chosen by each station must adapt to time‑varying channel conditions caused by mobility, interference, and location‑dependent errors. This work proposes a link‑adaptation algorithm that seeks to increase system throughput by selecting the transmission rate based on the current link condition. The algorithm relies solely on the received signal strength of incoming frames, requiring no modifications to the existing IEEE 802.11 MAC protocol. Simulations and numerical analysis demonstrate that the algorithm closely approximates the performance of an ideal scheme with perfect channel and receiver knowledge.

Abstract

IEEE 802.11 wireless local area network (WLAN) physical layers (PHYs) support multiple transmission rates. The PHY rate to be used for a particular frame transmission is solely determined by the transmitting station. The transmitting rate should be chosen in an adaptive manner since the wireless channel condition varies over time due to such factors as station mobility, time-varying interference, and location-dependent errors. In this paper, we present a novel link adaptation algorithm, which aims to improve the system throughput by adapting the transmission rate to the current link condition. Our algorithm is simply based on the received signal strength measured from the received frames, and hence it does not require any changes in the current IEEE 802.11 WLAN medium access control (MAC) protocol. Based on the simulation and its comparison with a numerical analysis, it is shown that the proposed algorithm closely approximates the ideal case with the perfect knowledge about the channel and receiver conditions.

References

7